1771-CP1 PLC-5 I/O Chassis Cable

1771-CP1

DESCRIPTION

1771-CP1 PLC-5 I/O Chassis Cable, connects panel mounted I/O Chassis to chassis mounted 1771-P7 Power Supply, 1.04ft, 0.32 meters

The 1771-CP1 is a chassis cable that interfaces the 1771-A3B Input-Output chassis with the 1771-P7 power supply. The 1771-CP1 has a length of 1.04 feet, limiting it to exclusively connect the power supply and the I/O chassis within this range. The 1771-CP1 connects to the D-shell connector on the left side of the 1771 I/O chassis; to firmly connect the 1771-CP1 cable, its two connector screws (one on either side) should be fastened after attaching the cable to the appropriate D-shell connector. The 1771-CP1 cable is then attached to the D-shell connector at the bottom of the 1771-P7 power supply. This cable also has small tightening screws on its other end, which should also be tightened, in order to firmly keep the 1771-CP1 in place. To reduce the amount of stress placed on the 1771-CP1 connectors, the cable should not be stiffly fixed between the 1771-A3B and the 1771-P7; ideally, there should enough slack in the length of the 1771-CP1 cable to allocate for this cable’s bending requirements. The 1771-CP1 is MARINE-BVS, MARINE-GL, MARINE-KRS, ROSTECHNADZOR, and KC certified. To prevent personal injury and property damage when connecting the 1771-CP1 to a power supply or to the I/O chassis backplane, ensure that the 1771-P7 power supply is completely turned off. The 1771-P7 power supply module should be mounted on the 1771-A3B I/O chassis prior to the 1771-CP1 cable being connected to interface them. The I/O chassis should have adequate ventilation in order to prevent the accumulation of heat, which may damage the modules and affect the optimal functioning of the 1771-CP1 cable. This prevents the power modules from operating as required.

Contact: Leonia | Sales Executive

Email: sales11@amikon.cn | Phone: +86 18030175807

Skype: 18030175807  |  Whatsapp: +8618030175807

ABOUT AMIKONPLC

We are trading company of PLC and DCS component for over 10 years.

Our main brands are:

, Bently Nevada, Siemens, ABB, Schneider, General Electric,

Honeywell, Invensys Triconex, Foxboro, Hima, Bachmann and so on.

All products are Brand New with 1 year warranty.

ADVANTAGE PRODUCT

1. 1756/1769/1771/1785 Series

2.ABB 800xA/Bailey INFI90/DSQC Series

3.Bently Nevada 3500/3300 Monitoring System

4.Schneider Series Quantum 140 series

5.General Electric IC693/IC697/IC698/IS200/DS200 Series

6.SIEMENS MOORE/S5 Series 

7.Westinghouse: OVATION/WDPF/MAX1000 system spare parts

8.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.

9.Honeywell TDC2000/TDC3000/Experion HS Series

10.YOKOGAWA CS3000 System

FREQUENTLY ASKED QUESTIONS

Q: Are you trading company or manufacturer ?

A: We are trading company.

Q: Which country or area can be shipped?

A: Worldwide.

Q: How do you ship goods?

A: By air.(DHL/TNT/UPS/FEDEX)

Q: How long is your delivery time?

A: Generally it is 2-3 days if the goods are in stock. 

MORE PRODUCTS

Email: sales11@amikon.cn | Phone: +86 18030175807